2 Axis CNC Motion Controller w/3.5" Color LCD For CNC Router Servo Stepper Motor

Description

Description
TC5520V 2 Axis CNC Controller Motion Controller w/ 3.5" Color LCD For CNC Router Servo Stepper Motor
Description:
It is an upgrading version of TC55. It is equipped with a 3.5-inch color screen, RS485 communication, Chinese/English Switch, and USB connection. Boot picture can be set as pictures or company name as you will. It is highly reliable, highly accurate, low noise, and easy to use.
Technical Specifications:
- Minimum data unit 0.001 mm
- Maximum data size ± 99999.999mm
- Maximum Speed: 9000mm/min (pulse is 0.001mm)
- Maximum pulse output frequency 150KHz
- Axis: 1, 2, 3 or 4 (X, Y,  Z, C). X, Y, Z, C axis can conduct linear interpolation, X, Y can do circular interpolation.
- Electric Gear: numerator: 1-99999 denominator: 1-99999
- System main functions are automatic, manual, program editing, system parameters, self-check, settings, etc.
- Maximum 480 commands each program
- USB Connection and upgrade
- Stop and Start of Spindle motor
- PLC Extension
- I/O Extension
- Isolated I/O port
- Self-defining of I/O port
- Chinese/English panel display
- Freeboot picture setting
Conversational Programming Code:
The conversational programming method automatically leads you to finish programming.
Programming Function Introduction:
Programming Code: Interpretation
Incremental: Incremental Programming
Absolute: Absolute Programming
Pause: Pause unless a certain condition is met, then skip to command called
Output: Define on and off of output port, ex. Stop and start of the spindle motor
Repeat: Go back to command called and repeat
Clockwise: Clockwise circular interpolation (Incremental programming)
Counter-clockwise: Counter Clockwise interpolation (Incremental programming)
Delay: Define the time of delay
Judge: Judge if a certain condition is met and skip to command called
Skip: Whenever this command is executed, unconditionally skip commanding called.
Fast: Fast positioning
Machine Zero: Go back to machine zero
Speed: Axis moves at a certain speed and will stop when certain condition met
Register: When this command is executed, the number on the main interface and the manual interface will be sent to this number.
Count: When this command is executed, the number on the main interface and manual interface will increase by 1 or decrease by 1.
Subprog Call: Subprogram Called
Subprog Start: Subprogram Started
Subprog End: Subprogram Ended
Coordinate: Set the current position as new coordinates
End: When the commands cannot be read, it will be considered as "End".
Coordinating: This command is similar to Judge when the certain condition of coordinates is met, it will skip commanding called.
PLC Judge: When a certain condition of PLC register value is met, it will skip commanding called.
PLC Set: Set Register address and value
Package Included:
- 1 x Set of CNC Controller
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Nov-06-20 at 01:20:28 PST, seller added the following information: